Specifications: Gator CX 4x2 available from Oregon Trail Eq, NE, KS

oregontrial2
Specifications: 
MANUFACTURER John Deere
MODEL Gator CX
Engine and Electrical  
Type 4-cycle gas
Ignition Magneto, solid state 12V
Cylinders 1
Cooling Air
Valving Overhead valves
Horsepower* 9.5 (7.1 kw)*
Displacement 286 cc (17.45 cu. in.)
Lubrication Full pressure
Oil filter Optional
RPM, idle (no load) 1150
RPM, fast (no load) 3850
Air cleaner Single-element paper, replaceable
Maximum torque 14.5 lb.-ft @ 2500 rpm
Battery U1, 160 CCA
Headlights Two at 25 watts, 12-volt DC
Muffler Optional spark arrester
Alternator 15 amp, regulated
Steering ---
Brakes  
Type Wet disk in transaxle
Park brake Wet disk, hand/foot operated
Tires  
Front 18x8.5-8, 4 PR Turf, 18x9.5-8 3 PR Knobby
Rear 20x10-8, 2 PR Turf, 20x11-8 3 PR Knobby
Available tread types Turf, Knobby
Weight, lb.  
Dry ---
Including Fuel/Fluids 687 lbs (312 kg)
Dimensions  
Seating capacity 2
Seat type Professional high back bucket seats, tilt forward
Seat adjustment Slide rail system - 14 positions, 1/2-in. increments
Front tread centers, in. 38.6 (980 mm)
Height, in. 44 (1118 mm)
Width, in. Rear: 49.0 (1245 mm), Front: 47.2 (1199 mm)
Length, in. ---
Without Bumper 95.7 (2431 mm)
With Bumper 98.2 (2494 mm)
Ground clearance ---
Under foot platform 4.8 (122 mm)
Under transaxle 7.0 (178 mm)
Payload capacity, lb. 800 (363 kg)
Rear Tread Centers, in. 39.8 (1011 mm)
Towing capacity, lb. 600 (272 kg)
Turning clearance circle, ft.-in. ---
Wheelbase, in. 65.5 (1663 mm)
Cargo Box  
Material High-density cross-linked polyethylene
Electric lift Optional
Capacity, lb. 400 (181 kg)
Depth, in. 7.8 (198 mm)
Length, in. 28.9 (734 mm)
Volume, cu. ft. 5.0 (.14 cu. m)
Width, in. 38.2 (970 mm)
Height above ground, in. 25 (635 mm)
Tailgate Hinged at bottom, removable
Fuel System  
Capacity, U.S. gal. 3.0 (11.4 L)
Fuel consumption (approx.) at half load and average speed, U.S. gal. 0.4 gal/hr (1.5 L/hr)
Fuel pump type Pulse
Suspension and Steering  
Front Independent, single A-arm suspension
Total travel 3.25 in. (82 mm)
Rear Triple-rate spring-over-shock
Total travel 3.5 in. (89 mm)
Steering Rack and pinion
Turning radius, ft. (m) 9.875 (3.0)
Transmission  
Type Continuous variable trans. (CVT)
Speed, mph 0-15 (0-24 kph) forward, 0-10 (0-16 kph) reverse
Drive belt Spun top cog, 30.0 mm wide
Overall reduction ratio ---
Forward 56:1 Low, 14:1 High
Reverse ---
Bearings Sealed bearings throughout
Axle 1 in. (25 mm) diameter forged, 1/4 in. (25 mm) square key
Differential Lock Standard, Hand-Operated
Drive Chain N/A
Transaxle Fully enclosed, oil bath
Gear Selection Forward, neutral, reverse
Ground Pressure, psi  
Fully loaded vehicle ---
With 200 lb. operator only ---
Machine  
Other standard features Two cup holders, glove box, hour meter, fuel site gauge, 12 V DC outlet
Color  
Options ---
Notes  
Disclaimers *Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less.
   
Specifications are based on published information at the time of publication. Specifications are subject to change without notice. Contact your local John Deere dealer for more information.  
   
Prices are subject to change without notice. Prices are in dollars and only applicable to products sold in the United States. In all cases, current published price lists and incentive program bulletins will take precedence. All trademarked terms, including John Deere, the leaping deer symbol and the colors green and yellow used herein are the property of Deere & Company, unless otherwise noted.