Specifications: 2700 Mulch Ripper available from Oregon Trail Eq, NE, KS

oregontrial2
MANUFACTURER MODEL
John Deere 2700
Tool
Configuration Disk - Disk - Ripper - Conditioner
Option 1 5-standard on 30-in. spacing
Option 2 7-standard on 24-in. spacing
Option 3 7-standard on 30-in. spacing
Option 4 7-standard on 30-in. spacing (low transport)
Option 5 9-standard on 24-in. spacing
Option 6 9-standard on 24-in. spacing (low transport)
Option 7 ---
Option 8 ---
Option 9 ---
Option 10 ---
Option 11 ---
Option 12 ---
Option 13 ---
Option 14 ---
Option 15 ---
Option 16 ---
Option 17 ---
Working Width
Option 1 12-ft. 6-in.
Option 2 14-ft.
Option 3 17-ft. 6-in.
Option 4 17-ft. 6-in.
Option 5 18-ft.
Option 6 18-ft.
Option 7 ---
Option 8 ---
Option 9 ---
Option 10 ---
Option 11 ---
Option 12 ---
Option 13 ---
Option 14 ---
Option 15 ---
Option 16 ---
Option 17 ---
Transport Width
Option 1 14-ft. 3-in.
Option 2 16-ft. 6-in.
Option 3 19-ft.
Option 4 16-ft. 3-in.
Option 5 19-ft. 3-in.
Option 6 16-ft. 10-in.
Option 7 ---
Option 8 ---
Option 9 ---
Option 10 ---
Option 11 ---
Option 12 ---
Option 13 ---
Option 14 ---
Option 15 ---
Option 16 ---
Option 17 ---
Depth
Maximum operating depth, in. 16
Transport Clearance
Standard, in. 10
Underframe Clearance
Maximum, in. 37.5
Speed
Operating speed 5-6
Horsepower
Horsepower required per standard 34-55
Depth Control
Option 1 Single point crank
Option 2 Electro-hydraulic TouchSet
Hydraulics
Option 1 3 SCVs (lift, front disks, rear conditioner) at 2500 psi for optimum raise times
Option 2 4 SCVs (lift, front disks, rear conditioner, and low transport fold) at 2500 psi for optimum raise times
Hitch
Design Single tube
Fore-aft adjustment Hitch turnbuckle
Standards
Spacing, in. 24, 30
Frame cross section ---
Standards, Option 1
Trip force, lb. Cushion-Trip standard - 4100
Trip height, in. 13 (shear bolt protected above)
Type Parabolic with or without wear shins, straight with wear shins
Standards, Option 2
Trip force, lb. Spring-Reset ripper standard - 3200-4700
Trip height, in. 22
Type Parabolic with or without wear shins
Standards, Option 3
Trip force, lb. Shear-bolt standard - 9000
Trip height, in. ---
Type Parabolic or straight with wear shins
Ground Engaging Components
Type 2.75, 5, 7, 10 in. Extreme LaserRips
Coverboards 4, 6, 8-in. on parabolic standards (not recommended for 24-in. spacing)
Wear shin ---
Mulching Disk Components
Description 2 sets up front
Depth control Hydraulically adjustable
Maximum depth, in. 4
Type of standard Rigid or C-spring
Base equipment blades 22 X .256-in. front and rear solid spherical low concavity
Blade spacing, in. 16.5 (effective)
Front frame angle 18 degrees fixed
Rear frame angle 16 degrees fixed
Spools NA - individually mounted disks
Bearings Maintenance free
Scraper ---
Rear Conditioner
Description conditioner
Adjustments Depth control - hydraulically adjustable
Type of standard C-standard, TruPosition standard
Base equipment blades 18 X 0.134-in. front and rear spherical
Bearings Maintenance free
Tires
Type 11L-15 FI D LR (4), 12.5L-15FID/F (4)
Wheels
Type Tandem Walk-Over wheels (7S30, 9S24 standard 12.5L-15; 5S30, 7S24 optional)
Rear Hitch
Type NA
Approximate Weight
Option 1, lb ---
Option 2, lb ---
Option 3, lb ---
Option 4, lb ---
Option 5, lb ---
Option 6, lb ---
Option 7, lb ---
Option 8, lb ---
Option 9, lb ---
Option 10, lb ---
Option 11, lb ---
Option 12, lb ---
Option 13, lb ---
Option 14, lb ---
Option 15, lb ---
Option 16, lb ---
Option 17, lb ---
Additional Features
Option 1 individually mounted rear conditioner blades for accurate settings
Option 2 ---
Option 3 ---
Option 4 ---
Option 5 ---